For property managers

Radon in a Colorado rental: the photo shows a number on a monitor, the signed disclosure and the measurement professional’s result show what the lease turns on

A Colorado duplex, eight months into a lease. The tenant emails a photo of a plug-in radon monitor on the basement shelf, its display reading “6.1 pCi/L”, and says they are ending the lease over it. A week later a mitigation company sends the owner a quote, then an invoice, with photos of a fan and a white pipe on the outside wall. All of those photos may be perfectly real. None of them answers the questions Colorado’s rental radon law actually turns on: what the tenant signed before the lease, who measured the radon, when the owner was told, and what the owner did in the next 180 days. This piece covers that law, C.R.S. 38-12-803, and what to check. It is not legal advice.

Why the photos can’t answer the question

Radon is a gas you can’t see. A photo of a monitor shows what one screen said at one moment. It doesn’t show which unit the monitor was in, how long it had been running, or who set it up. A photo of a fan shows a fan is on a wall. It doesn’t show the level came down. And the statute’s two triggers are both on paper: a disclosure the tenant signed, and a determination by a “radon measurement professional”.

What the landlord has to hand over, and when

The section starts with the tenant’s side: a tenant “has the right to be informed of whether the property has been tested for elevated levels of radon” (38-12-803(1)). Then the landlord’s duty: “Before signing a lease agreement for residential real property, the landlord shall disclose and provide in writing to the tenant” three things, “in a document that the tenant signs to acknowledge receipt of the disclosure” (2)(a):

And “The tenant shall acknowledge receipt of the information described in subsection (2)(a) of this section by signing the disclosure” (2)(b). “Residential real property” includes “A single-family home, manufactured home, mobile home, condominium, apartment, townhome, or duplex” (4)(a).

The section was added by Senate Bill 23-206, effective August 7, 2023, and the signed act says it applies to lease agreements entered into on or after that date. The 2026 code shows no later amendment to it.

Notice what (2)(a)(II) does to a mitigation invoice. Once a system is in, the owner has to give the next tenant “a system description and documentation” and “The most current records and reports”. Photos of a fan are not a system description, and they are not a test report. If the company’s paperwork is only photos, the owner will be short of what the next disclosure needs.

When a tenant can walk away

Subsection (3) gives the tenant a remedy. “Subject to subsection (3)(b) of this section, a tenant may void a lease agreement and vacate the premises in accordance with section 38-12-507 if the landlord fails to” (3)(a):

Three things in that second trigger are about records, not pictures. The number has to come from “a radon measurement professional”. The clock starts when the landlord is “notified”. And what the landlord owes within the 180 days is “a reasonable effort to mitigate”. The statute says effort, not a result, and it doesn’t define “radon measurement professional” in this section. We didn’t read 38-12-507 as a lawyer would, so we don’t describe how voiding and vacating works under it.

Then (3)(b): “On or after January 1, 2026, this subsection (3) does not apply to a lease agreement that is one year or less in duration.” That is the wording in both the signed act and the 2026 code. Read literally, from 2026 the walk-away remedy in (3) doesn’t reach a lease of a year or less, and most residential leases are a year or less. That is a surprising result, and we haven’t found anything that explains it, so ask a lawyer how it applies to your lease before relying on it either way. It limits subsection (3) only. The disclosure duty in (2) has no lease-length limit.

Back to the duplex

The tenant’s photo of the monitor is a reason to act, not the trigger in (3)(a)(II). That trigger is a professional’s determination, so the practical answer to the photo is a professional measurement, quickly, with the dates written down. If a professional’s result was what the tenant sent, the date you received it is the likeliest start of the 180 days; if the day matters, ask a lawyer. The mitigation invoice and its photos are part of your record of effort. The post-mitigation test is the part that shows whether the effort worked; our piece on radon mitigation invoices and the follow-up test covers that test and EPA’s timing for it.

Checks

  1. Find the signed disclosure for this lease, dated on or before the day the lease was signed. Check it has the bold warning, your known test history, and a note that the brochure was given. A disclosure signed after the lease is not what (2)(a) describes.
  2. Check the lease dates. When it was signed (on or after August 7, 2023 is when the section applies) and how long it runs (the (3)(b) question).
  3. Write down the date you were notified of a professional’s result of 4 pCi/L or more, and how. That date starts the 180 days in (3)(a)(II).
  4. Ask who measured, and get the report, not a photo of a display: the measurement dates, the unit and floor, the device, and the person or company with their credential. Ask your state radon office what credential counts; we don’t say.
  5. Keep the mitigation company’s system description and documentation, not just its photos. (2)(a)(II)(D) means you will hand it to the next tenant.
  6. Get the post-mitigation result and add it to the file. Under (2)(a)(II)(B) it becomes one of “The most current records and reports” you disclose next time.
  7. Ask for the original photo files, from the tenant and from the company, not pictures pasted into an email or a PDF, which have usually lost their camera record. Why, and how to ask for the originals.
  8. Drop the company’s photos in with its photos from your other properties. The checker marks any two files in the same batch that are the same file, even under different names. A white pipe on a wall is easy to reuse across jobs. A new photo of a different wall won’t show up that way, which is why the test reports matter more than the pictures.

A gap is a question, not a finding. A leasing agent may have handed over the disclosure on paper that never reached the file. A tenant may have had the test done by a professional and sent only a photo of the result. A company may not issue system documentation unless asked. Ask first.

Whether someone used AI on the photos

A photo of a monitor showing a high number is trivial to fake now, with or without AI, and so is a photo of a fan on a wall. Some generators write a mark into the file saying so, and the checker reads those marks, and the notes some phone editors leave when generative AI was used to alter a photo. A file with no such mark is not proven real. Most fakes and most genuine photos look the same to a file reader once they have been through a chat app or a screenshot. And a genuine photo of a monitor is still not a professional’s determination.

The limits, stated plainly

Related: radon mitigation invoices and the follow-up test, and Colorado repair records and the ten-day request.


ImposterShield reads the evidence inside image and video files. It runs in your browser and uploads nothing. If a file has been stripped, it says so. If it has not read a file, it says that too.

Check the photos before you act on them

Drop the tenant’s and the company’s photos on the page together with the company’s photos from your other properties. It shows what each file says about when it was made, and marks any two that are the same file. A saved report lists each file’s SHA-256.

Open the checker